Perniagaan Elektronik Sentral
19, Jalan PMS 1,
Plaza Melaka Sentral,
75400 Peringgit,
Melaka, Malaysia.
+6012-6399796
+606-2831913
0122309877

EMX5016

Previous 1 / 2 Next

EMX5016 Powered Mixer Mixers Yamaha


Overview

Serious Live Sound Capability Plus Innovative Digital Features

Live sound gear can be intimidating, but Yamaha's new EMX5016CF Powered Mixer takes the confusion out of setting up a professional-sounding live music experience. This 16-channel stereo powered mixer, which includes two 500-watt amplifiers, is ideal for bands, churches and small rental applications. The EMX5016CF delivers the convenience of an integrated powered mixer with input capacity, flexible features, and solid sound that critical live sound applications demand. It is remarkably compact and portable for a live sound system with this much capability, but offers performance and reliability that will satisfy the discerning professional user either on the road or in installed applications. And thanks to leading Yamaha digital technology, the EMX5016CF also includes a number of innovations that make it easier than ever to achieve top-class sound in just about any venue. An impressive power output of 500 watts per channel means it can handle fairly large audiences, indoors or out. The EMX5016CF goes considerably beyond the standard definition of "powered mixer," entering the realm of serious sound reinforcement.

Specifications


Maximum Output Power @ 0.5 % THD at 1 kHz 500 W/4 Ω
350 W/8 Ω (UA)
320 W/8 Ω (H)
Frequency Response -3, 0, 1 dB
20Hz-20kHz, ref to the 1kHz output level, GAIN=MIN, PAD=OFF
Total Harmonic Distortion Less than 0.3 % (THD+N)
+14dBu output into 600 Ω @ 20 Hz-20 kHz
Hum & Noise Equivalent Input Noise, -128 dBu, GAIN=MAX, 20 Hz-20 kHz, CH1-8 MIC
Crosstalk @ 1 kHz -68 dB
Input Connectors CH 1-8: XLR and Phone
CH 9/10-15/16: XLR. Phone and Pin
Channel EQ CH 1-8: HIGH (10 k, Shelving), MID (mono: 250-5 k, st: 2.5 k, Peaking), LOW (100, Shelving)
CH 9/10-15/16: HIGH (10 k, Shelving), MID (st: 2.5 k, Peaking), LOW (100, Shelving)
Phantom Voltage 48 V
Digital Graphic Equalizer 9 Band (63, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, 16 kHz), Preset x 3, User preset x 3
Digital Effects SPX Digital Multi Effector (24 bit AD/DA, 32 bit Internal Processing): 16 Programs x 2
Power Amp. Mode L/R, AUX1/MONO, AUX1/2
Foot Switch Effect On/Off
Dimensions (W x D x H) 444 x 493 x 155 mm (17-3/8" x 19-3/8" x 6-1/8")
Weight 11 kg (24.2 lbs.)
Power Requirements/Consumption 120 V 60 Hz, 500W
220-240 V 50 Hz, 500W

*All level controls are nominal, when measured. Output impedance of signal generator: 150 Ω

Input Characteristics


Input Terminals
PAD
GAIN
Actual Load Impedance
For Use With Nominal
Input level
Connector
Sensitivity *2
Position
Max. Before Clip
CH INPUT A 1-8
0dB -60 dB
3 kΩ
50-600 Ω Mics
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
XLR-3-31 type *3
-16 dB
-36 dBu
(12.3 mV)
-16 dBu
(123 mV)
+4 dBu
(1.23 V)
26dB -34 dB
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
+10 dB
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
CH INPUT B 1-8
0dB -60 dB
10 kΩ
600 Ω Lines
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV))
Phone Jack *4
26dB -16 dB
-36 dBu
(12.3mV)
-16 dBu
(123mV)
+4 dBu
(1.23V)
-34 dB
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155mV)
+10 dB
-10 dBu
(245 mV)
+10 dBu
(2.45V)
+30 dBu
(24.5 V)
ST CH MIC INPUT 9/10-15/16
-60 dB
3 kΩ
50-600 Ω Mics
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
XLR-3-31 type *3
-16 dB
-36 dBu
(12.3 mV)
-16 dBu
(123 mV)
-10 dBu
(245 mV)
ST CH LINE INPUT 9/10-15/16
-34 dB
10 kΩ
600 Ω Lines
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155mV)
Phone Jack *5
RCA Pin Jack*5
+10 dB
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
CH INSERT IN (1-8)
10 kΩ
600 Ω Lines
-20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.7.5 V)
Phone Jack *5

*1 0 dBu is referenced to 0.775 Vrms.
*2 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level.
(All level controls are at maximum position.)
*3 XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*4 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*5 Phone Jacks are unbalanced.


Output Characteristics


Output Terminals
Actual Source Impedance
For Use With Nominal
Output level
Connector
Nominal
Max. before clip
ST OUT [L, R] 150 Ω 600 Ω Lines +4 dBu (1.23 V) +20 dBu (7.75 V Phone Jack *2
ST SUB OUT [L, R] 150 Ω 600 Ω Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
AUX SEND 1, 2 150 Ω 600 Ω Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
EFFECT SEND 1,2 150 Ω 600 Ω Lines +4 dBu (1.23 V) +20 dBu (7.75 V Phone Jack *2
CH INSERT OUT 1-8 600 Ω 10 kΩ Lines 0 dBu (0.775 V) +20 dBu (7.75 V Phone Jack *2
REC OUT [L, R] 600 Ω 10 kΩ Lines -10 dBV (316 mV) +10 dBV (3.16 V) RCA Pin Jack
PHONES [L, R] 100 Ω 40 Ω Lines 3mW 75mW Phone Jack (TRS)
SPEAKERS 0.1 Ω 4 Ω Speakers 125W 500W SPEAKON
Phone Jack *2

*1 0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*2 Phone Jacks are unbalanced.
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Switch to Mobile Version
Subscribe Newsletter